The results generated by this calculator are preliminary design estimates for initial technical and economic evaluation purposes. They do not constitute a final engineering design or a formal quotation.
Filtration velocity parameters, equipment sizing, and financial analysis are based on typical ranges for Zeomedia 12×20 and 14×40 according to the official technical guide. Real project conditions may require specific adjustments.
A Zeomedia technical advisor will review your case and contact you to validate the design and provide a formal proposal.
Define the treatment objective and water type. Enter turbidity or TSS. The calculator automatically recommends the appropriate Zeomedia filter media and baseline design velocities.
Select whether the system is pressurized or gravity-fed. Choose a filter from the commercial catalog or enter custom dimensions. Define number of units and bed height.
Configure the filtration cycle and backwash velocities. Define active phases (water, air, air+water, rinse). Calculates water consumption and system water balance.
Size the backwash pump (by head or differential pressure) and the air blower if applicable. The flow rate is automatically inherited from the backwash module.
Enter water and energy rates in your currency of choice. Get the backwash OPEX per cycle, daily, and annual, with automatic conversion between USD, MXN, EUR, and SAR.
Enter the project CAPEX. The calculator generates the cash flow table, cost NPV, and present cost per treated m³.
Before the final summary, enter your contact information. The complete design summary is automatically sent to your email for review by a Zeomedia advisor.
Consolidated table with all key parameters from each module, active design alerts, and a side-by-side comparison vs Multimedia and Silica Sand with NPV savings.
| Phase | Active | Time (min) | Flow Rate / Filter | Status |
|---|---|---|---|---|
| Water | — | |||
| Air | — | |||
| Water+Air | — | |||
| Rinse | — |
Your preliminary Zeomedia filtration design is ready. Complete your contact information and we will send you the full summary by email. A Zeomedia technical advisor will review your case and contact you to validate the design and prepare a formal proposal.